Tips

Tips: questions and answers

Many coffee machine problems can be solved at home without opening anything. Here is what customers ask about most often. Your problem isn't here? Ask our technician.

☕ Which coffee? →

Ask the technician

What you can check yourself

Coffee is weak and watery — what to check?

Usually it's a grind that's too coarse, a low strength setting or old beans (an opened bag loses its aroma in 2–3 weeks). Set a higher strength, grind 1–2 steps finer and use fresh beans. If the coffee suddenly became watery without changing beans or settings, it's often worn seals or grinder burrs, and that needs checking in a workshop.

Didn't help? Bring the machine in — diagnosis is free.

Coffee tastes bitter or sour

Bitterness usually comes from a grind that's too fine, very dark roast, or a brew unit that hasn't been cleaned and overdue descaling. Sourness comes from a grind that's too coarse, a light roast or too low a temperature. Change one setting at a time and judge the taste only after 2–3 cups.

Didn't help? Bring the machine in — diagnosis is free.

There's hardly any crema on the coffee

Crema depends mainly on fresh beans and the grind. Use fresh beans, grind finer and check that descaling isn't overdue. Oily, shiny beans give less crema and clog the grinder.

Didn't help? Bring the machine in — diagnosis is free.

The machine asks for descaling — how and how often?

Don't put it off: scale clogs the pipes and the heater, and that means a serious repair. Use a coffee machine descaler (the brand's own, or one based on citric or lactic acid) and follow the programme in the menu. Never use vinegar — it damages the seals. Remove the water filter from the tank before descaling. How often depends on water hardness; if it's set correctly, the machine will remind you.

Didn't help? Bring the machine in — diagnosis is free.

How do I clean the brew unit?

In many machines (DeLonghi, Philips, Saeco, Siemens, Bosch, Melitta, Nivona and others) the brew unit is removable. Once a week, take it out with the machine switched off, rinse it in warm water without washing-up liquid, let it dry and put it back. Not in the dishwasher. In Jura machines the brew unit doesn't come out — it's cleaned with tablets using the menu programme. If the unit won't come out or won't go back in, don't force it.

Didn't help? Bring the machine in — diagnosis is free.

Milk doesn't froth well

After each day, take the frother or milk tube apart and rinse it with warm water; once a week use a milk system cleaner. Cold milk straight from the fridge froths best; lactose-free and plant milks froth less. If the frother hisses but makes no foam, it's usually clogged or sucking in air through a leak.

Didn't help? Bring the machine in — diagnosis is free.

The machine says 'no water' but the tank is full

Take the tank out and push it all the way in — often it simply isn't seated. Wash the tank: the float inside can stick because of deposits. If you've fitted a new filter, try without it — it may hold air. If the pump hums but no water comes out, that's a job for the workshop.

Didn't help? Bring the machine in — diagnosis is free.

Coffee comes out very slowly or from one spout only

The spouts are usually clogged — remove the spout unit (if it comes off) and clean it with warm water. A grind that's too fine and overdue descaling also slow the coffee down. If nothing changes after cleaning, a pipe inside may be blocked with scale.

Didn't help? Bring the machine in — diagnosis is free.

The machine asks to empty the grounds container, but it's empty

The machine usually can't see the grounds, it counts cups. The counter resets when you take the container out with the machine switched ON and wait a few seconds before putting it back. If you remove it while the machine is off, the message comes back. Check the drip tray too — it's linked to the same sensor.

Didn't help? Bring the machine in — diagnosis is free.

Machine settings

How do I set the grind?

Only change the grind while the grinder is running (while a coffee is being made) — in many machines turning the dial while the grinder is stopped can damage it. Change one step at a time; you'll only see the effect after 2–3 cups. Finer means stronger coffee that flows slower, coarser means weaker and faster.

Didn't help? Bring the machine in — diagnosis is free.

How do I set the water hardness?

Many machines come with a test strip (you can also buy one). Dip it in tap water for a second, count the coloured squares and set the same level in the machine's menu. Then the machine will remind you to descale at the right time — neither too early nor too late.

Didn't help? Bring the machine in — diagnosis is free.

Temperature and cup size

Both settings are in the machine's menu. If you drink coffee with milk, set a higher temperature — the milk cools it down. The cup size is changed in the menu or by holding the coffee button (it depends on the model; see the manual). If you can't find it, we'll show you when you pick up the machine.

Didn't help? Bring the machine in — diagnosis is free.

Do I need a filter in the water tank?

A filter reduces scale, but it must be replaced about every 2 months or when the machine reminds you. An old filter stops working and bacteria can grow in it — then it's better to have no filter at all. After fitting a filter, switch it on in the menu so the machine knows when to remind you.

Didn't help? Bring the machine in — diagnosis is free.

Which beans are right for an automatic machine?

Matte, medium-roast beans are best. Avoid oily, shiny beans (very dark roast) and flavoured or caramelised coffee — oil and sugar coat the grinder and brew unit, which is a common cause of breakdowns. Never put ground coffee in the bean hopper.

Didn't help? Bring the machine in — diagnosis is free.

Winter, moving house, long breaks — how to prepare the machine

Don't leave a machine with water inside in freezing temperatures (in a car, on a balcony, in an unheated house) — freezing water bursts the pipes and the boiler. If you bring it in from the cold, let it stand for a few hours in the warm before switching it on. After a long break, change the water in the tank and run 2–3 portions of water. When bringing the machine to us, empty the water tank, the drip tray and the grounds container.

Didn't help? Bring the machine in — diagnosis is free.

Customer questions

Answered by a technician from our workshop.

Loading questions…

Ask the technician

No password: enter your e-mail and we'll send a one-time code. Your question will appear here together with the answer, and we'll notify you by e-mail.

Tell us what's wrong with your machine — we'll call you back or send an SMS, advise and arrange the drop-off. Diagnosis is free.

Request a repair

Request