Error codes

Panasonic error codes — H01-H08 and U10-U14

Panasonic uses its own code system, unlike Saeco or Jura. The letter matters more than the number: H means electronics and mechanics inside, U means things that can usually be cleared.

CodeWhat it means
H01 - H08 An internal machine error.
U10 The brewing module is jammed.
U11 Too much ground coffee — the brewing module needs cleaning.
U12 Three possible causes: the filter adapter left in the tank without a cartridge; the tank overfilled or its housing wet; the grind set too fine.
U13, U14 Temperature: either the room is too cold, or the opposite — overheating from continuous use. The machine only works above 10 degrees.

The manufacturer does not break down the digits after the letter H. If an H code returns after cooling down and restarting, it is a genuine fault.

What you can check yourself

  • Switch off the Panasonic, unplug for 30 seconds and switch on again.
  • Check that the water tank and drip tray are seated correctly.
  • H and U codes point to specific parts.
  • Do not reset the machine in a loop when the code returns.
  • Bring the machine to KAWA PRO 2 — diagnosis is free.

Important

Don't switch the machine on and off over and over to make the error "go away", and never force the brew unit. If the code comes back after a normal restart, it is a real fault and the machine should be taken to a service centre without delay. Our diagnosis is free.

Tell us what's wrong with your machine — we'll call you back or send an SMS, advise and arrange the drop-off. Diagnosis is free.

Request a repair

Other brands

Request