Philips LatteGo error codes — EP2200, EP3200, EP4300, EP5400
Newer Philips machines with the LatteGo system and a display show a two-digit code. Some of them you can clear yourself.
| Code | What it means |
|---|---|
| 01 | Grinder funnel clogged — coffee stuck in the feed channel. |
| 03 | Brew group dirty — jammed by coffee oils or lack of lubrication. |
| 04 | Brew group is not fitted correctly. |
| 05 | Air in the water circuit, or a clogged AquaClean filter. |
| 11, 19 | Temperature shock — the machine was brought in from the cold. |
| 14 | The machine has overheated. |
| 02, 10, 15, 22 | Electronics, sensor or power circuit fault. |
These numbers apply to the LatteGo line. On older Saeco and Philips machines the same number means something else.
What you can check yourself
- Switch off the Philips LatteGo, unplug for 30 seconds and switch on again.
- Check that the water tank and drip tray are seated correctly.
- Dismantle the LatteGo jug, wash all parts and check the seals.
- Do not reset the machine in a loop when the code returns.
- Bring the machine to KAWA PRO 2 — diagnosis is free.
Important
Don't switch the machine on and off over and over to make the error "go away", and never force the brew unit. If the code comes back after a normal restart, it is a real fault and the machine should be taken to a service centre without delay. Our diagnosis is free.
Tell us what's wrong with your machine — we'll call you back or send an SMS, advise and arrange the drop-off. Diagnosis is free.