Error codes

Jura error codes — what error 1, 2, 5, 7 and 8 mean

Jura shows a short error number on the display. Below is what each number means. In our workshop error 8 is by far the most common.

CodeWhat it means
0 The brew unit does not reach its working position — position sensor or drive motor.
1 Short circuit in the temperature sensor (NTC).
2 Broken temperature sensor circuit — or simply too low a room temperature.
3, 4 Steam boiler temperature sensor, or no steam heating.
5 Boiler or thermoblock does not heat — heating element or thermal fuse.
6 Steam valve circuit or coil.
7 Jammed or broken multi-valve.
8 Brew unit blocked or worn. The most common Jura fault — coffee residue and worn seals.

Note: the numbers do not mean the same thing on every model. On IMPRESSA S90, S95, S9 and X90 error 8 means a start-up problem, not the brew unit.

What you can check yourself

  • Error 2: if the machine was in the cold, give it a few hours at room temperature — heating is blocked on purpose.
  • Error 8: do not force the brew unit. On Jura it is not removable — clean with tablets from the menu.
  • Any code: unplug for 30 seconds and switch on again. If the code returns — service is needed.
  • Check that the water tank sits correctly and the Claris filter is not overdue.
  • If the error comes back, do not reset in a loop; bring it in. Diagnosis is free.

Important

Don't switch the machine on and off over and over to make the error "go away", and never force the brew unit. If the code comes back after a normal restart, it is a real fault and the machine should be taken to a service centre without delay. Our diagnosis is free.

Tell us what's wrong with your machine — we'll call you back or send an SMS, advise and arrange the drop-off. Diagnosis is free.

Request a repair

Other brands

Request